HMT & IO-Link
SIMPLY WORK
IO-Link by HMT
HMT has almost 20 years experience designing IO-Link products, and was an early adopter of this rapidly growing sector with the release of the HMT7742 single channel PHY transceiver. HMT is committed to IO-Link, and we continue to develop and add more products to our growing IO-Link family.
Since the release of the HMT7742 IO-Link SINGLE PHY transceiver, we have included a dual channel version, the HMT7748 IO-Link DUAL PHY transceiver, a lightweight version, the HMT7740/1 IO-Link LIGHTWEIGHT PHY transceiver, and we offer a varied palette of IO-Link IP's and IO-Link module solutions for integration in a variety of customer specific applications.
HMT7742 IO-Link Device SINGLE PHY
Description
The HMT7742 GENIE family IC provides a bridge between a microcontroller with a sensor or actuator function and a 24V supply and signalling cable, specified to support IO-Link.
In normal operation the HMT7742 is configured by the microcontroller via the SPI interface at start-up. Typically the HMT7742 will then function as a Single Input Output IO-Link device driving the output line and load as configured by the microcontroller. If the device is connected to an IO-Link master, then the master can initiate communication and exchange data with the microcontroller while the HMT7742 acts as the physical/data-link layer for the communication.
Key Features
Package(s)
- Small format 3mm X 3mm, 12LD DFN package
Product Documentation
| Document | Doc Revision | PHY Revision | Status | Description | ||
|---|---|---|---|---|---|---|
| Datasheets | HMT7742 Datasheet NEW! | C | AA | Active | Product datasheet and technical specification | |
| Datasheets | HMT7742 Datasheet | K | R6 | Phase out | Product datasheet and technical specification | |
| Product Shortforms | HMT7742 Shortform Datasheet | F | Active | Shortform datasheet. Marketing materials | ||
| Product Shortforms | EM259 Shortform | A | Active | Shortform datasheet. Marketing materials | ||
| Evaluation Modules | EM259B Schematic Plot | A | Active | Evaluation Module Schematic plot. | ||
| Evaluation Modules | EM259B Assembly | A | Active | Evaluation Module assembly information. |
Quality & Reliability
| Status | Grade | Compliance | Materials declaration | MSL Level | Other |
|---|---|---|---|---|---|
Active | Industrial | RoHS Directive 2015/863 (RoHS 3), REACH | Conflict Minerals and Conflict Materials regulations are fulfilled | MSL2 | - |
Evaluation Modules
| Description | EM259 GENIE Explorer III |
|---|---|
| HMT IO-Link PHY | HMT7742 GENIE IO-Link DEVICE SINGLE PHY |
| Variant | Evaluation Module |
| Details | The EM259 GENIE Explorer III evaluation board allows a simplified connection for the development of sensor or actuator applications using the HMT7742 GENIE IO-Link DEVICE SINGLE PHY. The design of the board is such that microcontroller development platforms from both STM and Microchip may be used. A Demonstraton Application from our IO-Link stack partners TMG, which demonstrates a specific functional set of the HMT7742 IO-Link DEVICE SINGLE PHY, is available to download when the STM platform is selected during checkout. For porting to other microcontrollers, please contact TMG directly. |
| Compatibility | The EM259 is compatible with the following microcontroller development platforms and can be ordered directly at HMT: STM32 NUCLEO-L073RZ Arduino™ Uno V3 The EM259 is compatible with the following motion MEMS and environmental sensor expansion board from ST microelectronics: ST X-NUCLEO-IKS01A2 The EM259 is compatible with the following external EEPROM module from ST microelectronics: ST X-NUCLEO-EEPRMA2 |
| Image |  |
Ordering Information
PHY & Evaluation Modules
| Product ID | Revision | Package/Type | Art. No. | Stock | Delivery form | Maturity | ||
|---|---|---|---|---|---|---|---|---|
| HMT7742 3.3V | A | DFN 12LD 3mmx3mmx0.7mm | 15.00227 | In stock | Tape & Reel | Series | ||
| HMT7743 5.0V | A | DFN 12LD 3mmx3mmx0.7mm | 15.00231 | In stock | Tape & Reel | Series | ||
For larger quantities, please contact HMT Sales for a quotation. |
||||||||
| Product ID | Revision | Description | Art. No. | Stock | Delivery form | Maturity | Price(1) | |
|---|---|---|---|---|---|---|---|---|
| EM259 | B | GENIE Explorer III Evaluation Module | 15.20210 | On backorder | Single units | Series | €150.00 | Buy This product has multiple variants. The options may be chosen on the product page |
Notes: (1) Please contact HMT Sales for bulk orders. |
||||||||
Microcontroller Platforms (ST/Microchip)
Microcontroller platforms from both STMicroelectronics and Microchip may be purchased directly at HMT.
| Product ID | Revision | Target Platform | Art. No. | Stock | Delivery form | Price | |
|---|---|---|---|---|---|---|---|
| Nucleo-L073RZ | C | STM32L073RZT6U | 15.20212 | In stock | Single unit | €30.00 | |
| Arduino™ UNO (A000073) | V3 | ATMEGA328P | 15.20213 | In stock | Single unit | €30.00 | |
Notes: |
|||||||
HMT7748 IO-Link Device DUAL PHY
Description
The HMT7748 GENIE family IC provides a bridge between a microcontroller with a sensor or actuator function and a 24V supply and signalling cable, specified to support IO-Link.
In normal operation the HMT7748 is configured by the microcontroller via the SPI interface at start-up. Typically the HMT7748 then operates as a Single Input Output IO-Link device driving the output lines as configured by the microcontroller. If the device is connected to an IO-Link master, then the master can initiate communication and exchange data with the microcontroller while the HMT7748 acts as the physical/datalink layer for the communication.
Key Features
Package
- 4mm X 4mm, 20LD QFN package
- 2.5mm X 2.5mm, 19LD Chip Scale Package (CSP)
Product Documentation
| Document | Doc Revision | PHY Revision | Status | Description | |
|---|---|---|---|---|---|
| Datasheets | |||||
| HMT7748 Datasheet | H | R2,R3 | Legacy | Product datasheet and technical specification | |
| HMT7748 Datasheet | J | R4 | Active | Product datasheet and technical specification | |
| HMT7748 Datasheet Redline | J | R4 | Active | Changes with respect to previous datasheet version highlighted in red | |
| Product Shortforms | |||||
| HMT7748 Shortform Datasheet | F | Active | Shortform datasheet. Marketing materials | ||
| EM258 Shortform | A | R4 | Active | Shortform datasheet. Marketing materials | |
| Measurement Reports | |||||
| HMT7748 EMC Validation Report | A | R4 | Active | Measurement report for Surge, Burst, ESD, RF etc... | |
| Evaluation Modules | |||||
| EM258A Schematic Plot | A | R4 | Active | Evaluation Module Schematic plot. | |
| EM258A Assembly | A | R4 | Active | Evaluation Module assembly information. | |
Quality & Reliability
| Status | Grade | Compliance | Materials declaration | MSL Level | Other |
|---|---|---|---|---|---|
Active | Industrial | RoHS Directive 2015/863 (RoHS 3), REACH | Conflict Minerals and Conflict Materials regulations are fulfilled | MSL2 | - |
Evaluation Modules
| Description | EM258 GENIE Explorer III |
|---|---|
| HMT IO-Link PHY | HMT7748 GENIE IO-Link DEVICE DUAL PHY |
| Variant | Evaluation Module |
| Details | The EM258 GENIE Explorer III evaluation board allows a simplified connection for the development of sensor or actuator applications using the HMT7748 GENIE IO-Link DEVICE DUAL PHY. The design of the board is such that microcontroller development platforms from both STM and Microchip may be used. A Demonstraton Application from our IO-Link stack partners TMG, which demonstrates a specific functional set of the HMT7748 IO-Link DEVICE DUAL PHY, is available to download when the STM platform is selected during checkout. For porting to other microcontrollers, please contact TMG directly. |
| Compatibility | The EM258 is compatible with the following microcontroller development platforms and can be ordered directly at HMT: STM32 NUCLEO-L073RZ Arduino™ Uno V3 The EM258 is compatible with the following motion MEMS and environmental sensor expansion board from ST microelectronics: ST X-NUCLEO-IKS01A2 The EM258 is compatible with the following external EEPROM module from ST microelectronics: ST X-NUCLEO-EEPRMA2 |
| Image | |
Ordering Information
PHY & Evaluation Modules
| Product ID | Revision | Package/Type | Art. No. | Stock | Delivery form | Maturity | ||
|---|---|---|---|---|---|---|---|---|
| HMT7748R4-QFN | 4 | QFN 20LD 4mmx4mmx0.9mm | 15.20159 | In stock | Tape & Reel | Series | ||
| HMT7748R4-CSP | 4 | CSP 19LD 2.5mmx2.5mm | 15.20169 | In stock | Tape & Reel | Series | ||
For larger quantities, please contact HMT Sales for a quotation. quotation. |
||||||||
| Product ID | Revision | Description | Art. No. | Stock | Delivery form | Maturity | Price(1) | |
|---|---|---|---|---|---|---|---|---|
| EM258 | B | GENIE Explorer III Evaluation Module | 15.20209 | In stock | Single units | Series | €150.00 | Buy This product has multiple variants. The options may be chosen on the product page |
Notes: (1) Please contact HMT Sales for bulk orders. |
||||||||
Microcontroller Platforms (ST/Microchip)
Microcontroller platforms from both STMicroelectronics and Microchip may be purchased directly at HMT.
| Product ID | Revision | Target Platform | Art. No. | Stock | Delivery form | Price | |
|---|---|---|---|---|---|---|---|
| Nucleo-L073RZ | C | STM32L073RZT6U | 15.20212 | In stock | Single unit | €30.00 | |
| Arduino™ UNO (A000073) | V3 | ATMEGA328P | 15.20213 | In stock | Single unit | €30.00 | |
Notes: |
|||||||
HMT7740/1 IO-Link Device LIGHTWEIGHT PHY
Description
The HMT7740 and HMT7741 GENIE family IC is a physical layer transceiver (PHY) with a simple and flexible switching architecture, comprised of two independently driven bi-directional floating switches, with integrated surge and zero current reverse polarity protection.
The device is primarily used in IO-Link or Single Input Output (SIO) switching applications for driving coils or inductive and capacitive loads for industrial sensor/actuator applications. The device is available in two voltage configurations, 3.3V (HMT7740) or 5.0V (HMT7741).
Key Features
Package(s)
- 3mm X 3mm, 12LD DFN package
- 2.6mm X 1.6mm, 12LD Chip Scale Package (CSP)
Product Documentation
| Document | Doc Revision | PHY Revision | Status | Description | |
|---|---|---|---|---|---|
| Datasheets |
|||||
| HMT7740/1 Datasheet | C | AA | Active | Product datasheet and technical specification | |
| Product Shortforms | |||||
| HMT7740/1 Shortform Datasheet | C | Active | Shortform datasheet. Marketing materials | ||
| Evaluation Modules | |||||
| EM222A Schematic Plot | A | AA | Active | Evaluation Module schematic plot | |
| EM222 Assembly | A | AA | Active | Evaluation Module assembly information | |
Quality & Reliability
| Status | Grade | Compliance | Materials declaration | MSL Level | Other |
|---|---|---|---|---|---|
Active | Industrial | RoHS Directive 2015/863 (RoHS 3), REACH | Conflict Minerals and Conflict Materials regulations are fulfilled | MSL2 | - |
Evaluation Modules
| Description | EM222 GENIE Explorer III |
|---|---|
| IO-Link PHY | HMT7741 (5.0V) GENIE IO-Link DEVICE LIGHTWEIGHT PHY |
| Variant | Evaluation Module |
| Details | The EM222 GENIE Explorer III evaluation board allows a simplified connection for the development of sensor or actuator applications using the HMT7741 (5.0V) GENIE IO-Link DEVICE LIGHTWEIGHT PHY. A Demonstraton Application from our IO-Link stack partners TMG, which demonstrates a specific functional set of the HMT7741 (5.0V) GENIE IO-Link DEVICE LIGHTWEIGHT PHY, is available to download when the STM platform is selected during checkout. For porting to other microcontrollers, please contact TMG directly. |
| Compatibility | The EM222 is compatible with the following microcontroller development platforms and can be ordered directly at HMT: STM32 NUCLEO-L073RZ Arduino™ Uno V3 The EM222 is compatible with the following motion MEMS and environmental sensor expansion board from ST microelectronics: ST X-NUCLEO-IKS01A2 |
| Image |  |
Ordering Information
PHY & Evaluation Modules
| Product ID | Voltage [V] | Revision | Package/Type | Art. No. | Stock | Delivery form | Maturity | ||
|---|---|---|---|---|---|---|---|---|---|
| HMT7740-DFN | 3.3 | AA | DFN 12LD 3mmx3mmx0.75mm | 15.20175 | In stock | Tape & Reel | Series | ||
| HMT7741-DFN | 5.0 | AA | DFN 12LD 3mmx3mmx0.75mm | 15.20181 | In stock | Tape & Reel | Series | ||
For larger quantities, please contact HMT Sales for a quotation. |
|||||||||
| Product ID | Revision | Description | Art. No. | Stock | Delivery form | Price(1) | Maturity | |
|---|---|---|---|---|---|---|---|---|
| EM222 | A | GENIE Explorer III Evaluation Module | 15.20211 | In stock | Single unit | €150.00 | Series | Buy This product has multiple variants. The options may be chosen on the product page |
Notes: (1) Please contact HMT Sales for bulk orders. |
||||||||
Microcontroller Platforms (ST/Microchip)
Microcontroller platforms from both STMicroelectronics and Microchip may be purchased directly at HMT.
| Product ID | Revision | Target Platform | Art. No. | Stock | Delivery form | Price | |
|---|---|---|---|---|---|---|---|
| Nucleo-L073RZ | C | STM32L073RZT6U | 15.20212 | In stock | Single unit | €30.00 | |
| Arduino™ UNO (A000073) | V3 | ATMEGA328P | 15.20213 | In stock | Single unit | €30.00 | |
Notes: |
|||||||
HMT7742 IO-Link Device SINGLE PHY
Key Features:
- Integrated UART peripheral with M-sequence handling (inc. checksum) for all IO-Link sequences to specification 1.1
- Quartz-free IO-Link clock extraction and timing generation at 38.4kBaud and 230.4kBaud
- Zener limits for rapid inductive load switch off
- Configurable 5V or 3.3V, 50mA linear regulator
- Full zero current reverse polarity protection
- Over-voltage protection to 35V
- ESD protection to 4kV
- Integrated EMC surge protection to IEC 60255-5 (±1kV/500Ω)
- Small format 4mm X 3mm, 12LD DFN package
Documentation:
HMT7742 Development Modules
| Description | EM259 GENIE Explorer III |
| HMT IO-Link PHY | HMT7742 GENIE IO-Link DEVICE SINGLE PHY |
| Variant | Evaluation Module |
| Details | The EM259 GENIE Explorer III evaluation board allows a simplified connection for the development of sensor or actuator applications using the HMT7742 GENIE IO-Link DEVICE SINGLE PHY. The design of the board is such that microcontroller development platforms from both STM and Microchip may be used. A Demonstraton Application from our IO-Link stack partners TMG, which demonstrates a specific functional set of the HMT7742 IO-Link DEVICE SINGLE PHY, is available to download when the STM platform is selected during checkout. For porting to other microcontrollers, please contact TMG directly. |
| Compatibility | The EM259 is compatible with the following microcontroller development platforms and can be ordered directly at HMT: STM32 NUCLEO-L073RZ Arduino™ Uno V3 The EM259 is compatible with the following motion MEMS and environmental sensor expansion board from ST microelectronics: ST X-NUCLEO-IKS01A2 The EM259 is compatible with the following external EEPROM module from ST microelectronics: ST X-NUCLEO-EEPRMA2 |
| Image | |
| Description | STM32 development platform |
| Variant | Nucleo-L073RZ |
| Details | The STM32 Nucleo 64 development PCB provides a practical development environment for customers working with HMT’s IO-Link Mini-Stack and Demo Application on STM microcontrollers. |
| Info | STM Nucleo 64 development platform |
| Image |  |
| Description | ATMega328 (SMD) development platform |
| Variant | Arduino™ UNO (A000073) |
| Details | The Arduino™ Uno development PCB provides a practical development environment for customers working with HMT’s IO-Link Mini-Stack and Demo Application on MicroChip microcontrollers. |
| Info | Arduino™ UNO development platform |
| Image |  |
HMT7748 IO-Link Device DUAL PHY
Key Features:
- integrated UART peripheral with M-sequence handling (inc. checksum) for all IO-Link sequences to specification 1.1
- quartz-free IO-Link clock extraction and timing generation at 38.4kBaud and 230.4kBaud
- zener limits for rapid inductive load switch off
- configurable 5V and 3.3V, 50mA linear regulator
- configurable frequency & voltage (5V-10.5V), 50mA DCDC regulator
- full zero current reverse polarity protection
- dual outputs
- over-voltage protection to 35V
- ESD protection to 4kV
- integrated EMC surge protection to IEC 60255-5 (±1kV/500Ω)
- small format 4mm X 4mm, 20LD QFN package
Documentation:
HMT7748 Development Modules
| Description | EM258 GENIE Explorer III |
| HMT IO-Link PHY | HMT7748 GENIE IO-Link DEVICE DUAL PHY |
| Variant | Evaluation Module |
| Details | The EM258 GENIE Explorer III evaluation board allows a simplified connection for the development of sensor or actuator applications using the HMT7748 GENIE IO-Link DEVICE DUAL PHY. The design of the board is such that microcontroller development platforms from both STM and Microchip may be used. A Demonstraton Application from our IO-Link stack partners TMG, which demonstrates a specific functional set of the HMT7748 IO-Link DEVICE DUAL PHY, is available to download when the STM platform is selected during checkout. For porting to other microcontrollers, please contact TMG directly. |
| Compatibility | The EM258 is compatible with the following microcontroller development platforms and can be ordered directly at HMT: STM32 NUCLEO-L073RZ Arduino™ Uno V3 The EM258 is compatible with the following motion MEMS and environmental sensor expansion board from ST microelectronics: ST X-NUCLEO-IKS01A2 The EM258 is compatible with the following external EEPROM module from ST microelectronics: ST X-NUCLEO-EEPRMA2 |
| Image | |
| Description | STM32 development platform |
| Variant | Nucleo-L073RZ |
| Details | The STM32 Nucleo 64 development PCB provides a practical development environment for customers working with HMT’s IO-Link Mini-Stack and Demo Application on STM microcontrollers. |
| Info | STM Nucleo 64 development platform |
| Image | |
| Description | ATMega328 (SMD) development platform |
| Variant | Arduino™ UNO (A000073) |
| Details | The Arduino™ Uno development PCB provides a practical development environment for customers working with HMT’s IO-Link Mini-Stack and Demo Application on MicroChip microcontrollers. |
| Info | Arduino™ UNO development platform |
| Image | |
HMT7740/1 IO-Link Device LIGHTWEIGHT PHY
Key Features:
- switches independently driven (<8Ω)
- bidirectional switches, free selection of connection
- All high volt pins surge protected to IEC 60255-5 (±1kV/500Ω)
- bidirectional short-circuit detection and current limit auto-off/reporting/restart
- short circuit current derating with temperature
- full zero current reverse polarity protection
- 5V to 36V supply and 5V or 3.3V linear regulator
- thermal shutdown and under-voltage detection
- operation does not require micro-controller
- Available in DFN 3.0mm x 3.0mm or WLCSP 2.6mm x 1.6mm
Documentation:
